Why Measurements International?

Measurements International (or simply MI) specializes in providing products and services in two different and key areas: electrical metrology and electrical power transformer testing.

Widely acknowledged as the preferred provider of electrical metrology products and services, MI is used by the majority of National Measurement Institutes as well as hundreds of industrial primary standards laboratories worldwide. These permit the international community to support worldwide scientific research, as well as critical trade and commerce.

Learn Moredecorative icon

Z1000 iSimulator Impedance Simulator

Advanced LCR Meter Calibration

  • One Instrument Full LCR Meter Calibration
  • Utilizing State-of-the-Art 24-bit ADC and DAC Converters
  • Simulates Impedances From 1 Ω to 10 MΩ
Learn Moredecorative icon

1310T Temperature Resistance Standard

Designed & Developed for Temperature Laboratories

  • Exceptional Stability
  • Cost-effectiveness
  • Performance-based Results
  • 10 Ω, 25 Ω, 100 Ω, 200 Ω, 400 Ω and 1000 Ω Internal Standards
  • Built-in Temperature Chamber for
    Optimal Performance
Learn Moredecorative icon

9300 Temperature Controlled Air Bath

Redesigned 9300 Temperature Controlled Air Bath

  • Volume 50 Litres
  • Temperature Range 15 °C to 35 °C
  • Stability ± 50 mK for ± 1 °C
  • Dual Peltier Cooled
  • Improved Heating/Cooling Rate
  • Large Working Area
  • Temperature Band Protection
  • Perfect for Temperature Coefficient Measurements
  • Lightweight and Portable
Learn Moredecorative icon

1330A Automated Artifact Calibrator

Three Standards – One Box

  • Fully Automated Artifact Calibration of
    Calibrators and DMMs from a Single Instrument
  • Primary 1 Ω and 10 kΩ
  • 10 V Zener Reference
Learn Moredecorative icon

1340A High Precision Voltage Divider

Simplify Your Procedures. Simplify Your Work.

  • High Stability
  • No Self-Alignment
  • 10:1, 100:1 and 1000:1 Ratios
Learn Moredecorative icon

1310A Automated Resistance Standard

Developed & Designed by Metrologists for Metrologists & Calibration Technicians

  • Exceptional Stability
  • Automated Operation
  • 9 Values
  • Customizable
Learn Moredecorative icon

7070A AC Ratio Bridge

  • Calibration of Voltage and Current Transformers from a Single Instrument
  • Calibration of Instrument Transformers with Different Rated Ratios Using One Single Reference Standard
  • Test Frequency from 15 to 100 Hz
  • Calibration of CT Up to 10000 A
  • Calibration of VT Up to 800 kV
  • Short Measurement Times with High Accuracy and Low Inherent Burdens
  • Accurate Ratio Measurements of Two AC Signals – White Paper
Learn Moredecorative icon

6800C QHR Standard

  • Cryogen-Free
  • Dual Sample Probe
  • Graphene Compatible
  • Features AccuBridge® Technology
  • System Accuracy < 0.02 ppm
  • System Range 0.1 Ω to 100 kΩ
Learn Moredecorative icon

AccuBridge® 6020T Series

6020T – Premium Automated Thermometry Bridge

  • 0.01 Ω to 100 kΩ Range
  • Front Panel Channel Scanner
  • Accuracy < 15 × 10-9
  • Linearity < 5 × 10-9

6020T – Base Automatic Temperature Secondary Bridge – 14:1 Ratio

  • 0.01 Ω to 100 kΩ Range
  • Front Panel 6-Channel Scanner
  • Keep Warm Currents
  • Best Accuracy < 7 × 10-8
Learn Moredecorative icon

AccuLoss® Series of Transformer Loss Measurement System

  • Performance of Load and No
    Load Loss Measurements
  • Heat Run Test
  • Induced Voltage Test
  • Zero Sequence
    Impedance Measurement
  • Manual and Auto-ranging
  • Automatic Calculation & Display of Power Measurement
Learn Moredecorative icon
Decorative image New Products Decorative image
July 3, 2018 decorative image

Z1000 iSimulator Impedance Simulator

September 21, 2021 decorative image

1310T Temperature Resistance Standard

April 12, 2016 decorative image

9300 Temperature Controlled Air Bath

Decorative image Latest News Decorative image

MI at Measurement Science Conference

November 16, 2021

Stop by and say hello at the Measurement Science Conference.  Measurements International will be at booth 96 introducing our 13XX Series Product Line.

The 13XX series is the newest development from MI to offer solutions for the calibration of Calibrators and DVM’s. See why the 1330A is quickly becoming the industry standard in artifact calibration.

We look forward to seeing you at the show!

Learn More

Measurements International Announces 3 New Products

September 22, 2020

Measurements International announces three new products that deliver unique to industry features.
PRESCOTT, ONTARIO – Electrical metrology products manufacturer Measurements International today announced three (3) new products that offer game-changing features that position the company as the leader in the industry.

Learn More

Z1000 iSimulator Impedance Simulator

February 19, 2020

Measurements International (MI) is pleased to announce the commercial release of the Z1000 iSimulator. This is a revolutionary product that replaces the classical style of calibration of LCR meters in the industry.

Learn More