1000C Programmable DC Source

  • 0 to 1000 V
  • Stability < 6 ppm for 24 Hours
  • Absolute Accuracy < 25 ppm
  • Noise < 10 μV
Features & Benefits

The model 1000C was developed as a low drift, stable, low noise 1000 Volt Programmable DC Source for use with the model 6600A High Resistance Dual Source Bridge. The 1000C output is protected against accidental shorting and will not energize if voltage is detected on the output terminals. Revised software is included for the 6600A to fully automate the voltage testpoints and also includes a calibration routine designed specifically for the 1000C using only an 8.5 digit DMM (HP 3458A).

Specifications
Range Resolution Noise 24-Hour Stability Accuracy (1 Year Total)
0.2-2 V 1 μV 0.7 μV 7 ppm 30 ppm
2-20 V 10 μV 6 μV 6 ppm 25 ppm
20-200 V 100 μV 92 μV 7 ppm 30 ppm
200-1025 V 1 mV 700 μV 7 ppm 30 ppm
Performance specifications relative to setpoint
Warm Up Time 20 Minutes
Operating Power 110, 230 V – 50/60 Hz ± 10 %
Operating Environment 18 to 30 °C, 10 to 80 % RH
Dimensions 133 × 450 × 305 mm
Product Weight 12 kg
Shipping Weight 15 kg
Warranty 3 Years (Parts & Labour)

Information Request

  • Please fill in the details below to receive more information on this product

    * = Required Fields